<!-- Source: https://qlablis.in/guides/what-is-a-laboratory-information-system-lis/ · QLab by Qubha Infotech · updated 2026-11-21 -->

- [Home](https://qlablis.in/)
- [Guides](https://qlablis.in/guides/)
- What is a laboratory information system (LIS)?
Guide · 7 min read

# What is a laboratory information system (LIS)?

Quick answer
A laboratory information system (LIS) is software that manages a clinical laboratory's patient-centred workflow: test orders, sample collection and barcoding, analyser results, validation, reporting and billing. It keeps one electronic record per sample from order to report, so results are traceable, turnaround is faster and transcription errors fall sharply compared with manual registers.

Updated 2026-11-21

**On this page**

- [What are the core modules of an LIS?](#s1)
- [How is an LIS different from LIMS and HIS?](#s2)
- [How does data flow through an LIS?](#s3)
- [What benefits does an LIS bring to a diagnostic lab?](#s4)
- [Should an LIS be web-based or installed?](#s5)
- [What should an Indian lab check before buying an LIS?](#s6)
- [What does an LIS look like in a typical day at a lab?](#s7)
- [How does an LIS keep patient data secure?](#s8)
- [What is the difference between an LIS and simple billing software?](#s9)
- [FAQ](#faq)

## What are the core modules of an LIS?

Most LIS products are built from the same building blocks, even if the names differ:

| Module | What it does |

| Order entry / registration | Records patient, referring doctor, tests and billing |

| Specimen management | Generates barcodes, tracks collection, receipt and rejection |

| Worklists | Groups pending tests by department or analyser |

| Result entry and interfacing | Accepts manual results or analyser data over ASTM/HL7 |

| Validation | Applies reference ranges, flags, delta checks and pathologist approval |

| Reporting | Formats and delivers final reports as print, PDF, portal or message |

| Administration | Test master, rate lists, users, roles, branches and audit logs |

| Finance | Billing, dues, referrer commission and accounts |

QLab's version of each module is described on the [features page](https://qlablis.in/features/).

## How is an LIS different from LIMS and HIS?

- **LIS** – built around patients and clinical tests. Used by pathology labs, diagnostic centres and hospital labs.

- **LIMS** (laboratory information management system) – built around samples and batches, common in research, pharma, food, water and industrial testing labs where there is no "patient".

- **HIS** (hospital information system) – runs a whole hospital: OP, IP, pharmacy, wards. Its lab module is often basic, so many hospitals connect a dedicated LIS.

In India the words overlap. A diagnostic lab searching for "LIMS" or "lab management software" usually needs an LIS. QLab is an LIS for clinical labs; see [QLab LIS](https://qlablis.in/laboratory-information-system/).

## How does data flow through an LIS?

- **Register** – the front desk enters the patient and tests; the bill is generated from the rate list.

- **Collect** – a barcode label is printed and stuck on each tube.

- **Process** – the sample is scanned on the analyser or picked from the worklist; results arrive automatically or are typed in.

- **Validate** – the system flags values outside reference range; the pathologist reviews, comments and approves.

- **Deliver** – the report is printed, emailed or sent on WhatsApp, and stored for the patient's history.

Each step is time-stamped and tied to a user login, which is what auditors and quality standards such as ISO 15189 look for. See [NABL and lab software](https://qlablis.in/guides/nabl-iso-15189-and-lab-software/).

## What benefits does an LIS bring to a diagnostic lab?

- **Fewer errors** – barcodes and analyser interfacing remove most hand-copying.

- **Faster turnaround** – worklists show what is pending; reports go out as soon as they are approved.

- **Traceability** – who collected, entered, edited and approved each result.

- **Patient history** – previous values appear beside new results, helping the pathologist spot trends.

- **Revenue control** – every test billed, dues followed up, referrer shares calculated.

- **Growth** – adding a collection centre or branch is a configuration step, not a new system.

## Should an LIS be web-based or installed?

Web-based (cloud) LIS products are opened in a browser and are easy to reach from anywhere. Installed (on-premise) LIS products run on the lab's own machine and keep working without internet. Many Indian labs want both options, because internet reliability varies between cities and smaller towns. QLab offers a [cloud version](https://qlablis.in/pathology-lab-software/) and an [offline version](https://qlablis.in/offline-lab-software/) with the same features. Read [online vs offline](https://qlablis.in/guides/online-vs-offline-lab-software/) for help deciding.

## What should an Indian lab check before buying an LIS?

- Does it come with a test master suited to Indian labs, with units and ranges?

- Can reports be printed on your existing letterhead?

- Does it send reports on WhatsApp, which patients now expect?

- Does it handle referring doctors, rate lists and commission?

- Does it produce a GST report and day book?

- Can it interface with your analysers?

- Is support available in your language and time zone?

The full buying checklist is in [how to choose lab software in India](https://qlablis.in/guides/how-to-choose-lab-software-india/).

## What does an LIS look like in a typical day at a lab?

At 7:30 am the front desk registers fasting patients; the LIS pulls each test's rate and prints a bill and barcode labels in under a minute per patient. By 8:30 the technician's worklist shows every pending CBC, sugar and lipid profile, grouped by department. Analyser results arrive over the interface and wait in a "to verify" list. The pathologist opens each report, sees today's values beside the patient's previous results with abnormal values flagged, adds a comment where needed and approves. By late morning approved reports have gone out on WhatsApp and referring doctors can see them in their portal. At closing, the owner checks the day's collections, dues and referrer shares on the dashboard – without opening a single register.

## How does an LIS keep patient data secure?

- **Individual logins** – every action is linked to a named user.

- **Role-based permissions** – reception cannot approve results; technicians cannot change rates.

- **Encrypted connections** – data travels over HTTPS in cloud systems.

- **Separate data per lab** – in multi-tenant cloud software, one lab never sees another's records.

- **Backups** – daily in QLab Cloud; scheduled by the lab in offline installations.

- **Verifiable reports** – a QR code lets anyone confirm a report was issued by the lab.

These controls also support the principles of India's Digital Personal Data Protection Act: purpose limitation and reasonable security safeguards.

## What is the difference between an LIS and simple billing software?

Billing software stops at the receipt. An LIS continues through the sample, the result, the approval and the report, and links all of them to the bill. That link lets the lab answer questions like "which reports are still pending from yesterday?", "how many CBCs did this doctor refer this month?" or "which samples from the collection centre have not arrived?" – questions billing software alone cannot answer. See [QLab lab management software](https://qlablis.in/lab-management-software/).

## Frequently asked questions

### What does LIS stand for in a laboratory?

LIS stands for laboratory information system: software that manages test orders, samples, results, approvals and reports for a clinical lab.

### Is LIS only for big hospitals?

No. Cloud LIS products such as QLab start at a few hundred rupees a month, so single-pathologist labs and collection centres use them too.

### Can an LIS connect to lab analysers?

Yes. Most analysers send results over the ASTM or HL7 protocols, and an LIS with interfacing receives them without retyping. QLab interfaces over ASTM.

### Is LIS the same as LIMS?

Not exactly. LIS is patient-centred for clinical labs; LIMS is sample-centred for research and industrial labs. Indian diagnostic labs usually need an LIS.

**Written by the QLab team at Qubha Infotech**We build pathology lab software used by Indian labs and update this guide when rules or prices change. Last updated 2026-11-21.

## Related guides

[### What is pathology lab software?
Pathology lab software explained: what it does from billing to WhatsApp reports, who needs it, cloud vs offline, costs in India and how to pick the right one.](https://qlablis.in/guides/what-is-pathology-lab-software/)[### How to choose lab software in India
A 15-point checklist for choosing pathology lab software in India: features, reports, WhatsApp, offline mode, interfacing, support, pricing, data safety.](https://qlablis.in/guides/how-to-choose-lab-software-india/)[### Lab software price in India (2026)
Pathology lab software price in India in 2026: cloud vs offline cost, what is included, hidden charges, hardware needs and QLab plans from ₹399/month.](https://qlablis.in/guides/lab-software-price-india/)[### Online vs offline lab software: which is right for your lab?
Online (cloud) vs offline (on-premise) lab software for Indian labs: internet, data control, backups, remote access, branches, cost and WhatsApp reports.](https://qlablis.in/guides/online-vs-offline-lab-software/)

## See QLab running on your own tests

Free 30-minute demo over video call or at your lab. Setup, data migration and training are included in every plan.

[Book free demo](https://qlablis.in/demo/)
[WhatsApp us](https://wa.me/919597436220?text=Hi%20Qubha%2C%20I%20would%20like%20a%20demo%20of%20QLab%20lab%20software.)
